Shower Mold Busters: How to Eliminate Mold from Shower Seals

Shower seals not only detract from the aesthetics of your bathroom, but can pose health risks. In this article, we will explore an expert tip to get rid of shower seal mold.

Shower seals play an important role in keeping the shower watertight and not allowing water to penetrate. Because they are in constant contact with water, shower seals tend to become dirty due to the formation of mold and mildew, as well as lime and soap scum. Keep reading to learn how to effectively clean your shower seals.

I-What You Will Need:

– Half a cup of white vinegar.

– 5 tablespoons of baking soda.

II-Removing Shower Mold:

– Mix the white vinegar with the 5 tablespoons of baking soda until you have a foamy paste (the foam is produced by the reaction between the vinegar and the baking soda).

– Apply the formed paste on the joints and spread it well, then leave it to do its wonders all day.

– Scrub the areas covered with the paste using an old toothbrush and rinse with clean water.


– You will be able to clean the shower joints and remove mold, mildew, scale, and all residues.

– This method will eliminate blackening or any other discoloration, and any bad odors.

– Baking soda will clean joints and all treated spots.

– It will disinfect the surfaces thanks to vinegar, which is effective in eliminating the bacteria and the existing molds in this wet environment.

– This cleaning trick is cost-effective as these two products are not expensive at all, hence the economic advantage of the trick is guaranteed, apart from its flawless performance.

Don’t forget that the key method to fight shower mold is by implementing prevention measures. Such as regular cleaning, proper ventilation, and drying techniques, to minimize the risk of mold growth.

You Can Also Read :

Brighten Your White Laundry With These 5 Tips

Flush Away Unpleasant Scents: 3 Tips to Eliminate Urine Odor in Your Bathroom

Published by
Stacey Smith